SS Capillary Tube Seamless is designed to change the high pressure liquid refrigerant into a low pressure spray of refrigerant. Its pressure drop amount is dependent on the length and inside diameter of the tube.
304L 6*0.5 stainless steel capillry tubing coiled tubing
316 SS Capillary Tubing is the standard molybdenum bearing grade tube. It provides better corrosion resistant properties than 304 SS Capillary Tubing, especially higher resistance to pitting and crevice corrosion in chloride environments.
304L 6*0.5 stainless steel capillry tubing coiled tubing
316 Stainless Steel Capillary Tubing ForHplc are components in both liquid and gas chromatography columns which are used for preparative and analytical processes across the fields of analytical and biochemistry.
304L 6*0.5 stainless steel capillry tubing coiled tubing
Chemical Composition of Stainless Steel 304
Table 1. Chemical composition for 304 stainless steel alloys
|
% |
304 |
304L |
304H |
|
C |
0.0 – 0.07 |
0.0 – 0.03 |
0.04 – 0.08 |
|
Mn |
0.0 – 2.0 |
0.0 – 2.00 |
0.0 – 2.0 |
|
Si |
0.0 – 1.00 |
0.0 – 1.00 |
0.0 – 1.0 |
|
P |
0.0 – 0.05 |
0.0 – 0.05 |
0.0 – 0.04 |
|
S |
0.0 – 0.03 |
0.0 – 0.02 |
0.0 – 0.02 |
|
Cr |
17.50 – 19.50 |
17.50 – 19.50 |
17.00 – 19.00 |
|
Ni |
8.00 – 10.50 |
8.00 – 10.50 |
8.00 – 11.00 |
|
Fe |
Balance |
Balance |
Balance |
| N | 0.0-0.11 | 0.0-0.11 | 0.0 – 0.10 |
Properties of Stainless Steel 304
Mechanical Properties of Stainless Steel 304
Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick
|
Grade |
304 |
304L |
304H |
|
Tensile Strength (MPa) |
540 – 750 |
520 – 700 |
- |
|
Proof Stress (MPa) |
230 Min |
220 Min |
- |
|
Elongation A50 mm |
45 Min % |
45 Min % |
- |
Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick
|
Grade |
304 |
304L |
304H |
|
Tensile Strength (MPa) |
520 – 720 |
500 – 700 |
- |
|
Proof Stress (MPa) |
210 Min |
200 Min |
- |
|
Elongation A5 |
45 Min % |
45 Min % |
- |
Post time: Aug-14-2023